Key Features   • Peak or track torque measurement on integrated display   • Point of load insensitive   • HI/OK/LO audible and visual status indicators   • 100 date and time stamped reading memory   • Swivelling head to aid accessibility

DTW is simple to use, point of load independent, transducerised torque wrench with an integrated digital display.

DTW features two measurement modes for displaying either peak or real time torque. Upper and lower limits can be set in peak mode enabling an audible signal and an LED to indicate HI, OK or LO fastener status.

The transducer element of the DTW is directly in line with the wrench drive, thus making the DTW’s measurement completely independent of the point of load. This means the operator can be assured of correct measurement however the wrench is held and torque applied. The drive head of the DTW can also be rotated through +/- 135° in 45° increments to aid accessibility. Up to 100 data and time stamped readings are stored and can be downloaded to a printer or PC for archiving or further processing of data.

The “DS” subrange of lower torque wrenches feature a display a separate housing, connected to the wrench by a curly cable, supplied with a neckstrap.